Banner
  • Decrease font size
  • Reset font size to default
  • Increase font size
Romanian English Hungarian
Noutăți
Noutăți
VSE-1100
The VSE-1100 helps cable service providers maintain optimal network performance with video and spectrum analysis for fast and easy preventive maintenance and troubleshooting.
Innovative upstream test modes speed troubleshooting to shorten mean time to repair. A tablet user interface and measurement engine simplify operation and remote test capabilities.
Highlights
The industry’s first ground-up integrated spectrum and video platform for service-layer to physical-layer testing designed specifically for cable applications
The fastest and most powerful upstream verification and troubleshooting capabilities found in an analyzer platform
Makes every technician an expert—solves complex problems with the most intuitive user interface available
The industry’s smallest and lightest digital spectrum video analyzer platform—for the headend/hubsite and the field
Applications
Rapid and consistent rollout and troubleshooting verification of CCAP and RemotePHY applications
Fast troubleshooting as technicians work across network segments, solving issues quickly and completely—the first time
Collaborative MPEG and RF analysis—reducing MTTR by letting techs track issues through the network
Objective and quick segmentation of service-impacting upstream issues that affect end-customer experience
Clearly-indicated impulse noise and ingress to significantly speed resolving intermittent issues
Key Features
Real-time JDSU Hyper-Spectrum™ overlapping FFT analysis instantly detects any transient interference and noise
Portable MACTrak™ demodulates upstream signals to detect code word errors and linear distortions
AutoChannel™ delivers content-intelligent tuning through an innovative method of automatic channel program detection and channel plan building.
MPEG error visibility with live transport-stream display and post-capture analysis helps troubleshoot difficult video issues
One-screen display shows all spectrum, level, and MER measurements of all channels (the world’s first)
In-band and in-service fault measurements that standard spectrum analysis tools frequently miss, reducing repeat rates
 
Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
MSQ-900 MicroStealth QAM

The MSQ-900 is simple and compact, yet packs an impressive feature set with remarkable performance. It provides all the necessary tests for verifying digital and analog cable services up to 1 GHz. The digital measurements include digiCheck digital signal level, modulation error ratio (MER), and pre- and post-FEC bit error ratio (BER). The MSQ-900 also possesses the features expected in a good SLM including analog channel video level, video-to-audio level, carrier-to-noise (C/N), full scan, and tilt.

MSQ-900

Documentație!

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
SmartID

The SmartID test mode is a standard feature in JDSU DSAM Digital Service Activation Meter XT version firmware (v 4.0 and higher), enabling sophisticated measurement data analysis (with SmartID probes). The SmartID test quickly displays and certifies subscriber coax topology and identifies and locates physical-layer impairments that affect both triple-play and multiroom DVR (MoCA) services.

SmsrtID Documentație

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
TV via network cables cat 5e/6

TV via Network Cable

More and more in-home communications infrastructures consist solely of network cables. The subsequent lack of coaxial cables creates problems when trying to connect different types of equipment, such as TV sets and computers. 

Catline is our solution a completely new system concept for distributing TV signals via standard network cables, such as CAT5/CAT6.Catline can distribute analogue or digital TV signals up to 50 metres (at 860 MHz) and its amplifier has four independently adjustable outputs.

Click pt. documentaţie

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
HD RANGER+ TV & Satellite analyser

 

The HD RANGER+ is a universal analyser that covers a comprehensive mix of broadcast standards around the globe. The latest developments in broadcast technology such as DVB-T2/C2/S2 (DVB-T/C/S also included) with MPEG-2 as well as MPEG-4 video is managed effortlessly within the product.

One of the most noticeable and stunning features on the new HD RANGER+ product is the ultra fast spectrum analyser. As soon as you use the analyser you will experience this outstanding feature as one of the major changes we have adopted in the new product allowing you to sweep faster and more accurately.

The introduction of the latest technology within the product allows you to display multiple screens either overlapped together or in a split screen format.
HD RANGER+ TV & Satellite analyser
DVB STANDARDS DVB-T/T2, DVB-C/C2, DVB-S/S2
DOLBY DIGITAL PLUS Included
OPTICAL MEASUREMENTS Optional
3 GHz BAND EXTENDER Optional

 

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
AV to IP solution

 

DT-504B Quadruple Video/Audio encoder, DVB-T and TS-ASI output

 

The DT-504B module offers the possibility to build a broadcast signal in DVB-T and TS-ASI(*) format from four composite video and audio inputs. It is made of four independent video and audio MPEG-2 encoders and a modulator. Audio inputs can be stereo or mono.

Frequently some TV services are only available as analogue baseband video. That is the case of encrypted programmes which can only be received with a dedicated STB and smart card, signals from CCTV cameras, door entry systems, etc.

By means of the DT-504B modulator, programmes originally in analogue format are inserted to the TV distribution network with the benefits of DVB-T technology.

(*) TS-ASI output optional (option OP-504-S).
Click here to enlarge the image of the DT-504B
Click on the image to enlarge it.
A/V INPUTS
  Connectors
4 independent A/V inputs
3 RCA-Female connectors for each input
RF OUTPUT
  Connector
1 DVB-T multiplex
Female F-type, Impedance 75 Ω
TS-ASI OUTPUT Optional
MPEG-2 ENCODER
  Video input
  Audio input
  Format
  Video bitrate
  Audio bitrate
  Editable parameters
  Measurements

PAL/NTSC
Stereo/Mono/Dual/Joint Stereo
MPEG-2
Acording to DVB-T modulation parameters
From 32 to 384 kbits/s selectable
Service Name, Service ID, Video PID, Audio PID, PMT PID
Total bitrate
CONFIGURATION
AND POWER SUPPLY

Via the DT-800 Control and Power module. Control can be made remotely from a PC

PDF datasheet

 

DT-610 DVB-T to FO Optical Transmitter
 
The DT-610 module is an optical transmitter that converts RF signals into optical so that they can be transmitted over fibre-optics cables.

The laser diode modulation is optimized for DVB-T and DVB-C digital channel transmission. It is suitable for optical links over distances up to 20 km (depending on the number of channels used in the system).
Click here to enlarge the image of the DT-610
Click on the image to enlarge it.
RF INPUT
  Frequency margin

  Input level

From 470 to 862 MHz
From 50 to 1000 MHz (please ask for other options)
From -8 to -32 dBm (MER>38 dB)
FO OUTPUT
  Wavelength
  Laser type
  Modulation
  Output level
  Connector
  Fibre
  Indicators

1550 ±20 nm (other wavelength as option)
DFB
Direct amplitude modulation
+ 4.5 dBm
SC/APC
9/125, SMF28 or equivalent
Laser state

PDF datasheet

DT-620 Fibre optic to DVB-T receiver
 
The DT-620 is an optical receiver that converts optical input signals into RF for their transmission over a distribution network.

In order to travel for long distances the RF signal was previously converted into optical by the DT-610. Once at the other end of the link the DT-620 converts it again to RF thus recovering the original signal. The system is optimised to work with DVB-T and DVB-C channels.

This module is suitable for optical links of up to 40 km (depending on the number of channels). The optical input supports wavelengths from 1100 to 1600 nm.
Click here to enlarge the image of the DT-620
Click on the image to enlarge it.
OPTICAL INPUT From 1100 to 1600 nm
(input power from 1100 to 1600 nm)
RF OUTPUT From 470 MHz to 862 MHz
LINK (WITH TRANSMITTER DT-610)
  Gain
  Flatness

0 dB ± 3 dB (at 0 dB of optical loss)
2 dB

PDF datasheet

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
ReFreeT2 DVB T2 Measurement Receiver

DESCRIPTION

ENENSYS ReFeree T2 allows to monitor DVB-T and DVB-T2 parameters (RF, T2 frame structure, PLP parameters), whatever the DVB-T (MFN/SFN...) or DVB-T2 transmission mode (Single PLP, Multi PLP, SFN/MISO. ..).

ReFree DVB T2 Measurement Receiver

As forerunner on DVB-T2, ENENSYS proposes a real time application, capable to monitor simultaneous RF signal & Transport Stream content. Monitoring screens can be totally customized.

In its basic version, the ReFeree T2 features live stream capture capabilities for baseband stream (T2-MI or MPEG2-TS) recording. The application also integrates a video decoder enabling real-time decoding of any unencrypted services (SD, HD MPEG-2/4, H264) within the DVB-T2 stream.

To facilitate your analysis, ENENSYS RFScope plug-in includes a specific screen gathering the main RF parameters in real-time: Rotated Constellation, Impulse response, SNR level, LDPC iterations, BER monitoring... Depending on the received signal, this screen automatically adapts to DVB-T or DVB-T2 parameters.

With the TS Analyzer plug-in, the Transport Stream carried by the DVB-T signal, or even contained inside the selected PLP of the DVB-T2 stream can be analyzed. PSI/SI tables are parsed and displayed (including Private Table parsing). The 3 priority levels of ETR290 are implemented. Bitrate can be monitored globally and for each service. Customizable alarms are also available.

Finally, the DVB-T2 standard has defined the DVB-T2 Modulator Interface, or T2-MI. The T2MI plug-in software gives access to the most complete T2MI Multi-PLP analyzer: L1 specific screen (pre & post signalling), T2 Frame composition, T2 timestamp, ... Detailed information on DVB-T2 Modulator interface (T2-MI) is available on the www.dvb.org web site in the blue book section: Modulator Interface (T2-MI) for a second generation digital terrestrial television broadcasting system (DVB-T2), ref A136.

SOFTWARE

Comes bundled with DiviSuite  Acquisition, Decoding and Recording/Playback  Software. Plu-ins can be ordered separately, according to customer requirements: only choose what you need. Any proposed plug-in can be mounted later on.

INTERFACES

- 1x DVB-T2 / DVB-T  RF input

- 1x DVB-ASI  TS input (Simple TS or T2MI over ASI)

- 1pps + 10MHz + GPS inputs for measurements based on external references(future use)

- TS over IP input

- USB connector for connection to Laptop (Self powered over USB Bus)

ASSOCIATED DOCUMENTS

ENENSYS_ReFeree_T2_DVB_T2_Measurement_Receiver_Datasheet

Cumpăr

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
Twin COFDM Encoder 310 series

That’s a twin A/V input to COFDM MPEG2 modulator with agile output

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
Structura GPON pe rețea RF

Structura GPON pe rețea RF

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
Cabluri Optice din Stoc

Cabluri optice CORNING!!!

1 LOT cantiataea de 128,184km

Material description

Fibres

meter

A-DQ(BN)H 1X4E9/125

4

2.606

A-D(ZN)(SR)H 1X4E9/125

4

2.085

A-DQ(BN)2Y 1X4E9/125

4

1.004

A-DQ(ZN)(SR)H 1X4E9/125

4

1.608

A-DQ(BN)H 1X6E9/125

6

9.401

A-DQ(BN)H 1X8E9/125

8

6.025

A-DQ2Y(ZN)2Y 4X2E9/125

8

15.426

A-DQ(BN)2Y 1X8E9/125

8

4.297

A-DQ(BN)H 1X12E9/125

12

3.245

A-DQ2Y(ZN)B2Y 6X2E9/125

12

10.481

A-D(ZN)2Y 1X12E9+/125

12

10.179

A-DQH(BN)H 1X12E10/125

12

1.954

A-DQ2Y(ZN)B2Y 4X4E9/125

16

1.487

A-DF(ZN)2Y 5X4E9/125

20

5.290

A-DF(ZN)(SR)2Y 2X12E9/125

24

961

A-DQ(ZN)(SR)2Y 1X24 E9/125

24

3.910

A-DQH(ZN)H 6X4E9+/125

24

9.898

A-DQ(ZN)2Y 2X12E9/125

24

5.925

A-DF(ZN)(SR)2Y 4X6E9/125

24

2.550

A-DQ(ZN)2Y 3X6E9/125

24

2.711

A-DF(ZN)(SR)2Y 4X12E9/125

48

2.172

A-DQ(ZN)2Y 4X12E9/125

48

1.438

A-DQH(ZN)H 6X8E9/125

48

5.790

A-BQ(ZN)(2ZN)2Y 1x(12x4) E9/125

48

11.799

A-DQ(ZN)(SR)2Y 4X12E10/125

48

5.942

Joomla Templates and Joomla Extensions by JoomlaVision.Com
 
Promax PROLITE-67

Selective Optical Power Meter for FTTx-xPON

prolite-67

  • Attenuation test
  • Visual locator to find faults in the fibre
  • Red laser at 650 nm with an universal connector
  • User interface in several languages
  • Connection USB to PC to transfer the data recorded by the instrument
  • MODE 1: Selective Meter by wavelength: 1310-1490-1550 nm
  • Simultaneous measurement for three wavelengths (1310/1490/1550 nm) generated by the PROMAX triple laser source in order to certificate fiber optics
  • Analysis of the signal level (Pass / Fail) according to thresholds editable by the user
  • Absolute and Relative measures display
Joomla Templates and Joomla Extensions by JoomlaVision.Com
Citeşte mai mult...
 
EFS-150 PDF  Array Imprimare Array  Email


EFS-150   The EFS-150 mini fusion splicer for both singlemode and multimode fibres. With a splicing time of less than 7 seconds and a unique software, it is the fastest and smartest mini splicer on the market.

Joomla Templates and Joomla Extensions by JoomlaVision.Com
Citeşte mai mult...
 
Inspectează înainte de a conecta!

Inspectează înainte de a conecta!  

Joomla Templates and Joomla Extensions by JoomlaVision.Com
Citeşte mai mult...
 
TVHUNTER

TV-Hunter

TVHUNTER DTT finder
TVHUNTER a fost proiectat pentru instalarea şi reglarea antenelor de digitale terestre.

Joomla Templates and Joomla Extensions by JoomlaVision.Com
Citeşte mai mult...
 
Pay TV Scrambler

Totalcrypt Pay Tv

TOTALCRYPT PAY TV SCRAMBLER
TOTALCRYPT PAY TV DESCRAMBLER MODULE
Pay TV allows access to the programs for those only, having paid the due fees.

Joomla Templates and Joomla Extensions by JoomlaVision.Com
Citeşte mai mult...
 
<< Început < Anterior 1 2 Următor > Sfârşit >>